POST- OR WALL-MOUNTED OUTDOOR CABINETS

outTEG OMR

The outTEG OMR LITE outdoor cabinets present an ideal solution for projects with high safety requirements of installed equipment and stable climate in the rack with the possibility of installing a pole or a wall. The double wall design of the enclosure protects the components installed from any weather, as well as from vandalism, thanks to the compact structure of the cabinet that prevents access to the components installed from the outside. For extreme weather conditions, the side panel variants can be modified to allow the installation of fans or air conditioning units.
Weather resistance is mainly guaranteed by AlMg3 alloy used for cabinet housing and applied finish of UV-protected polyester powder paint.

MAIN ADVANTAGES

  • Compact and lightweight double wall design
  • Maximum corrosion protection
  • Integrated roof features
  • Made of aluminium alloy AlMg3
  • Polyester powder paint with UV protection
  • Not PUR seal porous, suitable for extreme temperatures

Description

Material

  • Aluminum alloy AlMg3
  • Coating Polyester powder paint with UV protection

Colorstrong

ul>

  • RAL 7035 for outdoors
  • Optionally RAL 7046 for the roof

    <

strong>p><<>IP>/strong>

  • IP65 according to EN60529 (the degree of protection can be reduced after mounting some accessories)

Mechanical protection

  • IK10 according to IEC 6226

Supply includes

    • Double wall outdoor cabinet, fully mounted and assembled with perforated roof
    • Natural ventilation between interior and exterior walls
    • Front door with two handles, key combination 333, door stop. Easily configured for a right or left door mount.
    • Internal horizontal rails drilled in the side panels
    • Door stop
* You have to order 2 sets, for 1400 to 1600 mm high you have to order 3 sets. For 800 mm wide cabinets with IDO-MR-Nxx you should also order an IDO-MR-N-B holder (2 games for 1 game of IDO-MR-Nxx).
OMR-DL-080605
OMR-DL-080605
OMR-DL-080605 + ID-W-MP6 on a post

accessories

POLE MOUNT BRACKETS

  • Material: 2 mm stainless steel
  • Installation: for poles up to 250 mm diameter
  • Load: 200 kg
  • Package includes: pole mount brackets and all necessary mounting parts (2 profile rails, 2 clamping straps (l=850 mm), 8 sets: M8 12 screws, self-locking nuts and adhesion washers)

wall mounts

  • Material: 3 mm stainless steel
  • Load: 100 kg
  • Package includes: wall mount brackets and all mounting parts
    required for cabinet mounting

plinth

  • Height: 100 mm
  • Material: 2 mm stainless steel 1.4016 (AISI 403)
  • Surface finish: polyester powder paint
  • Color: RAL 7046

  • li>You must order ID-x-SPSxx and ID-x-SPxx
  • Package includes: sockets and all necessary mounting parts
* 1 set includes: 2 side piece, mounting accessories.
*1 set includes: 1 front, 1 rear, mounting accessories.

door switch

  • Material supports: 2 mm galvanized steel sheet
  • Door switch: IP65, plastic, 1NO + 1 NC, PG13,5, -25 °C to +70 °C
  • Use: available for outdoor cabinets of minimum height 500 mm
    and depth 250 mm
  • Package includes: door switch and all necessary mounting parts

pocket for documents

  • Material: ABS
  • Color: RAL7035
  • Dimensions: 234 241 31 mm (depth width width)
  • Mounting: with self-adhesive tape
  • Package includes: plastic document pocket and adhesive tape

illumination unit

  • Lamp: LED, angle 120°, 6 500 K
  • Brightness: 400 lm
  • Voltage/Frequency: 24-265 V DC/AC ~50/60 Hz
  • Energy consumption: 5 watts
  • Light control: Motion sensor
    built-in, shutdown time 5 min
  • Mounting: Magnets
  • Operating temperature:
    -30°C – 70°C
  • Dimensions: 357.4 32 35.5 mm
    (high depth width)
  • Weight: 140 gr.
  • Certifications: CE, UL

EARTHING

  • ID-W-EK: complete grounding kit for wardrobe
  • ID-W-EW68/EW88/EW8816: 300 mm cable length with terminals
    crimps
  • li

  • Set includes: nuts, screws for grounding(s) door(s),
    and mounting cabinet

RAILS FOR INTERNAL INSTALLATION

  • Material: 2 mm galvanized steel sheet with 25 mm drilling
  • Rail width: 75 mm
  • Installation: on interior horizontal rails forming part of the cabinet
  • Use: available for outdoor cabinets with a minimum depth of 250 mm
  • Package includes: 2 rails for internal installation and all necessary mounting
    parts.
* 1 set-2 pieces.

FIXED EXTRUSIONS OF 19

  • Material: galvanized steel sheet of 2 mm
  • Rail width: 56 mm
  • Installation: on inner rails forming part of the cabinet or on supports
    ID-W-UB for outdoor cabinets of 800 mm width
  • Use: available for cabinets of minimum depth 250 mm and width
    600 and 800 mm
  • Package includes: Fixed extrusions of 19″ and all necessary mounting parts
    .
* 1 set-2 pieces

mounting plate

  • Material: galvanized steel sheet
  • Package includes: 50 50 50 mm labeled frame mounting plate
    (mounting parts are included in cabinet accessories)
* 3 F-3mm mounting plate with 2 folded edges.

SCREW GLANDS AND NUTS WITH PG/METRIC THREAD

  • Material: poliamida PA6, sellado CR (neopreno)
  • Grado de protección: IP68
  • Color: RAL 7035

SCREW GLANDS AND NUTS WITH PG/METRIC THREAD

  • Material: polyamide/elastomer, UL-94 Vo, self-extinguishing
  • Protection: IP64
  • Installation: clippings in clamps
  • Cuttings for installation
    in the CONTEG
  • Modification Centre

Individual orders are placed at the modification center, which is part of a modern industrial company in Pelhrimov. The center also features a MODCentrum 29 CNC milling machine.
We can cut holes for fans with filter, coolers, control panels and buttons. The cabinets can be made of sheet steel, stainless steel (AISI 304 and 316L) or aluminum.
Cutouts can be made in detachable flat parts of the rack walls (doors, cable entrances, side panels, ceilings and mounting plates), as well as in welded monolithic cabinets.

refrigeration and heating

  • Material: stainless steel housing
  • Degree of protection: IP66
  • Sealing: permanent sealing seal of closed cell polyethylene foam
  • Connection by terminal strip
  • Regulations: for more information, contact our technical service
  • Package includes: thermoelectric cooling unit ready to connect

warmers

  • Material: aluminium profile
  • Technology: PTC, self-regulation
  • ID-EH-80F-4: two heating circuits
  • Penetration protection: IP20
  • li>

  • Installation: pressure fixing on DIN rail 35 mm EN 50022
  • Package includes: heater ready to connect

THERMOSTAT FOR COOLING AND HEATING

HYGROSTAT

  • Installation: DIN rail 35 mm
  • Connection: screw terminals
  • Humidity control range: 35-100 % HR
  • Switching capacity (max load) 5 A/230 V
  • Switching hysteresis: 3 % HR
  • Dimensions (Al P)67 50 38 mm
  • Package includes: hygrostat ready to connect

drainage device

  • Material: plastic according to UL94 V-0, umbra grey, waterproof with UV protection
  • Degree of protection: IP67
    Tightness: NBR
  • Dimensions: Ø 60 49,5 mm, 17,5 mm inside the cabinet
  • Water flow: 200 ml/hour
  • Mounting: vertical at lowest point, thread M50 1.5 with nut (trim Ø 50 mm)
  • Package includes: 1 unit of drainage device

PRESSURE COMPENSATOR

  • Montaje: rosca PG 29 con tuerca de unión (diámetro de corte 37 mm)
  • Posición de montaje: vertical (El tipo de protección está restringido a IP54 si el montaje
    posición del compensador de presión no es vertical.)
  • Material: plástico según UL94 V-0, gris claro RAL 7035
  • Grado de protección: IP55
  • Dimensiones: Ø 65,5 30,5 mm
  • El paquete incluye: 2pcs de compensador

technical drawings

heat dissipation

Our entire family of murals for data centers