Below you have available to download in pdf format the documents and certificates you need. If you do not find the desired document please contact us.

Catalogues

In the next section you have catalogs with our entire range of updated products.

LOGIC 2

Practical and logical, this is how Retex defined and created the new generation of racks that revolutionized the market.

WITRACK

Cabinets 19" for the wall support of network installations and electronic equipment.

MININET

Wall rack designed for small SOHO home and office installations.

PDU PM

PDU PM

PM allows for the monitoring of PDU measurements, total local monitoring of the PDU through the integrated LCD display (True RMS), as well as the environmental conditions in the racks.

PDU POS

PDU POS

POS allows for the monitoring of PDU measurements through the integrated LCD display (True RMS) in the PDU and remote monitoring (IP/SNMP) of the entire PDU. It also includes individual outlet power management (ON/OFF).

EDURACK-3

Designed for safe and convenient storage of notebooks and laptops in the educational environment.

COOLTEG PLUS DX

The CoolTeg Plus DX rack-mount cooling units are based on the principle of direct evaporation with refrigerant.

COOLTOP DX

The CoolTop DX rack-mounted cooling units are specially designed for easy installation on top of racks.

COOLSEVEN

The CoolSeven unit with direct evaporation represents the group of in-rack precision cooling units.

Korat

KORAT

1U, 17.3" FULL HD LED-backlit display. Ports include DVI, VGA, USB, PS/2, CAT 5. Supports 1 to 32 ports. Features a keyboard with a numeric keypad and touchpad. Easy installation and ergonomic design.

AW 19

1U, 19" LCD display with LED backlighting. Ports include DVI, VGA, USB, PS/2, and CAT 5. Supports 1 to 32 ports. Features a keyboard with a numeric keypad and touchpad. Easy installation and ergonomic design.

RETO

Unique solution "Flat-pack" with a quick and safe final assembly in 5 minutes, without tools.

EASYRACK

Cabinets 19" for wall support of networks, telecommunications and electronic equipment.

ACCESSORIES

Accessory families for both floor and wall racks classified by groups.

PDU PIML

PDU PIML

PIML allows for the monitoring of PDU measurements through the integrated LCD display (True RMS) in the PDU and remote monitoring (IP/SNMP) of the entire PDU, as well as the environmental conditions in the racks.

PDU POM

PDU POM

POM allows for the monitoring of PDU measurements through the integrated LCD display (True RMS) in the PDU and remote monitoring (IP/SNMP) of the entire PDU, for each outlet. It also includes monitoring of environmental conditions in the racks.

ENCLOSURES

Professional metal and plastic enclosures for different uses, watertightness and radiofrequency regulations.

COOLTEG PLUS DF

The CoolTeg Plus DF rack-mounted distribution cooling unit combines the advantages of CW and XC systems - Free-Cooling.

COOLTOP CW

The CoolTop CW rack-mounted cooling units are specially designed for easy installation on top of racks.

COOLOUT

The CoolOut external condenser unit is a product specially designed for heat extraction from data centers.

AK

1U, 17" 4:3 LCD display with LED backlighting. Ports include VGA, DVI, HDMI, CAT 5, USB, and PS/2. Supports 1 to 32 ports. Features a keyboard with a numeric keypad and touchpad. Easy installation and ergonomic design.

IP RACKS

The outTEG OMR outdoor weatherproof cabinets offer an ideal solution for projects with high demands for equipment security and stable climate conditions within the rack.

SR2

Modular cabinets for wiring, telecommunications, IT and industrial electronics installations.

Q-RACK 3

Cabinets 19 for wall support of networks, telecommunications and electronic equipment.

PDU RX iRX

Enable the optimization of available power in telecommunications and CPD’s facilities

PDU PIM

PDU PIM

PIM allows for the monitoring of PDU measurements through the integrated LCD display (True RMS) in the PDU and remote monitoring (IP/SNMP) of the entire PDU, as well as environmental conditions in the racks.

PDU POMS

PDU POMS

POMS allows for the monitoring of PDU measurements through the integrated LCD display (True RMS) in the PDU and remote monitoring (IP/SNMP) of the entire PDU, for each individual outlet.

COOLTEG PLUS CW

The CoolTeg Plus CW water-cooled units are designed for connection to any chiller system with a supply of cold water.

COOLTEG PLUS XC

The CoolTeg Plus XC rack-mounted distribution cooling units are based on the principle of direct evaporation.

COOLSPOT

CoolSpot products are cooling units designed for CONTEG PREMIUM and OPTIMAL racks to achieve the desired environment within the rack.

CRAC

Indoor CRAC (Computer Room Air Conditioning) cooling unit for data centers based on the principle of compressor cooling and direct evaporation.

AW17

1U, 17.3" FULL HD LED-backlit display. Ports include DVI, VGA, USB, PS/2, CAT 5. Supports 1 to 32 ports. Features a keyboard with a numeric keypad and touchpad. Easy installation and ergonomic design.

IP WALL

The outTEG OMR LITE outdoor weatherproof cabinets offer an ideal solution for projects with high demands on the security of installed equipment and stable climate conditions within the rack. They can be installed on a pole or a wall.

LOGIC 2

Practical and logical, this is how Retex defined and created the new generation of racks that revolutionized the market.

Racks

RETO

Unique solution "Flat-pack" with a quick and safe final assembly in 5 minutes, without tools.

SR2

Modular cabinets for wiring, telecommunications, IT and industrial electronics installations.

WITRACK

Cabinets 19" for the wall support of network installations and electronic equipment.

EASYRACK

Cabinets 19" for wall support of networks, telecommunications and electronic equipment.

Q-RACK 3

Cabinets 19 for wall support of networks, telecommunications and electronic equipment.

MININET

Wall rack designed for small SOHO home and office installations.

ACCESORIOS

Accessory families for both floor and wall racks classified by groups.

PDU RX iRX

Enable the optimization of available power in telecommunications and CPD’s facilities

PDU PM

PDU PM

PM allows for the monitoring of PDU measurements, total local monitoring of the PDU through the integrated LCD display (True RMS) in it, as well as monitoring of environmental conditions in the racks.

PDU PIML

PDU PIML

PIML allows for the monitoring of PDU measurements through the integrated LCD display (True RMS) in the PDU and remote monitoring (IP/SNMP) of the entire PDU, as well as monitoring of environmental conditions in the racks.

PDU PIM

PDU PIM

PIM allows for the monitoring of PDU measurements through the integrated LCD display (True RMS) in the PDU and remote monitoring (IP/SNMP) of the entire PDU, as well as monitoring of environmental conditions in the racks.

PDU POS

PDU POS

POS allows for the monitoring of PDU measurements through the integrated LCD display (True RMS) in the PDU and remote monitoring (IP/SNMP) of the entire PDU. It also includes individual outlet power management (ON/OFF).

PDU POM

PDU POM

POM allows for the monitoring of PDU measurements through the integrated LCD display (True RMS) in the PDU and remote monitoring (IP/SNMP) of the entire PDU, for each individual outlet. It also includes monitoring of environmental conditions in the racks.

PDU POMS

PDU POMS

POMS allows for the monitoring of PDU measurements through the integrated LCD display (True RMS) in the PDU and remote monitoring (IP/SNMP) of the entire PDU, for each individual outlet.

Armario para ordenadores

EDURACK-3

Designed for safe and convenient storage of notebooks and laptops in the educational environment.

CAJAS

Professional metal and plastic enclosures for different uses, watertightness and radiofrequency regulations.

COOLTEG PLUS DF

The CoolTeg Plus DF rack-mounted distribution cooling unit combines the advantages of CW and XC - Free-Cooling systems.

COOLTEG PLUS DX

The CoolTeg Plus DX rack-mounted distribution cooling units are based on the principle of direct evaporation with refrigerant.

COOLTEG PLUS XC

The CoolTeg Plus XC rack-mounted distribution cooling units are based on the principle of direct evaporation.

COOLTEG PLUS CW

The CoolTeg Plus CW water-cooled units are designed for connection to any chiller system with a supply of cold water.

COOLTOP DX

The CoolTop DX rack-mounted cooling units are specially designed for easy installation on top of racks.

COOLTOP CW

The CoolTop CW rack-mounted cooling units are specially designed for easy installation on top of racks.

COOLSPOT

CoolSpot products are cooling units designed for CONTEG PREMIUM and OPTIMAL racks to achieve the desired environment within the rack.

COOLSEVEN

The CoolSeven unit with direct evaporation represents the group of in-rack precision cooling units.

COOLOUT

The CoolOut external condenser unit is a product specially designed for heat extraction from data centers.

CRAC

Indoor CRAC (Computer Room Air Conditioning) cooling unit for data centers based on the principle of compressor cooling and direct evaporation.

Korat

KORAT

1U, 17.3" FULL HD LED-backlit display. Ports include DVI, VGA, USB, PS/2, CAT 5. Supports 1 to 32 ports. Features a keyboard with a numeric keypad and touchpad. Easy installation and ergonomic design.

AK

1U, 17" 4:3 LCD display with LED backlighting. Ports include VGA, DVI, HDMI, CAT 5, USB, and PS/2. Supports 1 to 32 ports. Features a keyboard with a numeric keypad and touchpad. Easy installation and ergonomic design.

AW17

1U, 17.3" FULL HD LED-backlit display. Ports include DVI, VGA, USB, PS/2, CAT 5. Supports 1 to 32 ports. Features a keyboard with a numeric keypad and touchpad. Easy installation and ergonomic design.

AW 19

1U, 19" LCD display with LED backlighting. Ports include DVI, VGA, USB, PS/2, and CAT 5. Supports 1 to 32 ports. Features a keyboard with a numeric keypad and touchpad. Easy installation and ergonomic design.

IP RACKS

The outTEG OMR outdoor weatherproof cabinets offer an ideal solution for projects with high demands for equipment security and stable climate conditions within the rack.

IP WALL

The outTEG OMR LITE outdoor weatherproof cabinets offer an ideal solution for projects with high demands on the security of installed equipment and stable climate conditions within the rack. They can be installed on a pole or a wall.

Certificados

In the next section you have the certifications of our products.

Type of certificateDateDownload file
ISO 9001:2023Valid until 13/03/2026Download PDF
ISO 14001:2023Valid until the 14/03/2026Download PDF
CE CONFORMITY DECLARATIONIssue date 22/09/2023Download PDF
GARANTÍA GENERALIssue date 26/08/2021Download PDF
CERTIFICATE OF COMPLIANCE WITH THE REACH DIRECTIVEIssue date 29/07/2021Download PDF
CERTIFICATE OF COMPLIANCE WITH THE ROHS DIRECTIVEIssue date 29/07/2021Download PDF